Plastic pipe equipment

Plastic pipe machines mainly produce PE, PVC, PP, HDPE products, which are widely used in various fields, including food, construction engineering, agriculture, medical treatment, power communication, etc., with a high demand!

SJ-120/38PE560-1000A/B/A Pipe Line Production Line Parameters

*Product specifications:

Φ 560mm, Φ 710mm Φ 800mm Φ 900mm Φ 1000mm

I. Environmental conditions

1. Location Indoor

2. No danger zone for power supply

3. Humidity 85% non condensing

4. Temperature 0-40 ℃

II. Usage conditions

1. Power supply 3-phase 380V (-10%,+5%) 50Hz

2. Installed capacity: 750kW

3. Cooling circulating water: ≤ 20 ℃ ≥ 0.3Mpa~45T/h

4. Compressed air: 0.4m3/min ＞ 0.8MPa

III. General Provisions

This equipment uses a composite extrusion method to produce polyethylene pipes with identification lines.

IV. Main technical performance

1. Resin used: polyethylene HDPE PE80/100

1、 General Provisions

This equipment uses a composite extrusion method to produce HDPE A/B/A three-layer composite pipes with identification lines. Adopting dual machine co extrusion can increase production capacity and produce multi-color pipes, reducing costs. When producing small pipes, one extruder can be opened, and multi-layer composite co extrusion special purpose pipes can be produced. The wall thickness and flow rate of each layer can be adjusted, making it possible to produce multi-functional composite pipes; Enhance market competitiveness.

2、 Main technical performance

1. Used resin: polyethylene (PE)

2. Extrusion amount:

*The extrusion amount may vary depending on the processing materials and operating conditions.

Maximum production capacity Φ 1000mm.

3. Specification: Same as above

4. Production line speed: maximum 0.05-1.2m/min

5. Extruder center height: 1350mm

6. Operation direction: from right to left

7. Equipment color: milky white or color palette provided by the customer

3、 Equipment composition

1. Automatic feeding system (SML280) 1 set

2. 1 set of automatic material drying system (GZ800)

3. One SJ120/38 high-efficiency single screw extruder

1 SJ25/25 single screw extruder

1 set of 1000 polyethylene three-layer pipe mold and mold trolley

7. One double vacuum shaping box

8. One single vacuum shaping box

9. Three rain curtain spray boxes

10. Two sets of elliptical correction devices

11. One eight claw traction machine

12. One planetary cutting machine

13. 1 set of pipe stacking rack